 |
||||
| Micro Batteries | Household | Rechargeable | Commercial | Auto Moto Marine |
Drill and Power Tool Battery Pack Rebuilds
Shop rebuilt power tool battery packs
here 
Shop new power tool battery packs by brand here
Would you like to consolidate all your battery purchases under one roof? Your wait is over! Here at microbattery.com, we have recently added a state of the art technical center responsible for custom assembly of nickel cadmium (Ni-CD) and nickel metal hydride (Ni-MH) battery packs. This in-house service can save you a substantial amount of money each time it is utilized. For example, replacing a Dewalt 18 volt drill battery pack at your local retailer can run upwards of $89.99 or better. With our service, we dismantle your existing worn out battery pack and replace the battery cells inside with your choice of upgraded cell options shown in the box below.
Voltage |
STANDARD | BETTER | BEST |
|---|---|---|---|
| Ni-CD Batteries 1500 mah |
Ni-CD Batteries 2100 mah |
Ni-MH Batteries 3300 mah |
|
| 6 volt | $14.95 |
$16.95 | $24.95 |
| 7.2 volt | $17.95 | $20.95 | $29.95 |
| 8.4 volt | $20.95 | $23.95 | $34.95 |
| 9.6 volt | $23.95 | $26.95 | $39.95 |
| 12 volt | $29.95 | $34.95 | $44.95 |
| 14.4 volt | $35.95 | $41.95 | $59.95 |
| 18 volt | $44.95 | $55.00 | $65.00 |
| 19.2 volt | $48.00 | $58.00 | $70.00 |
| 24 volt | $60.00 | $68.00 | $100.00 |
As you can see, by allowing us to rebuild your old battery pack, you save money regardless of the grade of cell that you select.
Deciding Between Battery Types
When choosing the correct Ni-CD or Ni-MH replacement cells for your particular application, there are several factors that are important for you to consider: number of charge cycles, longevity of run time, and memory effect:
Number of charge cycles. A charge cycle consists of a full charge and a full discharge of the battery pack. Ni-CD battery cells will provide you with a range of 800-1000 charge cycles. Ni-MH battery cells will provide you with fewer at a range of 400-500 charge cycles.
Longevity of run time refers to the running time between charges and is dictated by the battery's milliampere hour [mAh] rating. Essentially, the higher a battery's mAh rating, the longer will be its run time. Ni-CD battery cells are available in 1500 mAh and 2100 mAh ratings. Ni-MH battery cells have significantly longer run times than Ni-CD cells. Our most popular is the 3300 mAh line, which is the preferred battery cell for high performance battery packs in the remote control car industry. These are also used in drill packs to provide extra run time and exemplary performance.
Memory effect generally refers to cases in which batteries appear to hold less of a charge than expected. Specifically, it describes a characteristic of Ni-CD batterys' gradual loss of its maximum energy capacity when it is repeatedly recharged after being only partially discharged. This infamous "memory effect" can be controlled only if Ni-CD cells are completely discharged between recharges. Ni-MH cells, on the other hand, build up little to no memory effect, and are preferred throughout the industry for this type of application.
Turnaround Time and Delivery options
Our in-house battery rebuild services typically will have a 24 - 48 hour turnaround time from the time of receipt of your old battery packs at our state of the art facilities. You may elect to drop off or ship to us any number of battery packs. At the time of receipt, we will provide you with a turnaround time estimate. If you choose to drop them off, we will call you immediately upon completion of your battery packs and you can pick them up at your convenience. Otherwise, the newly reconstructed battery packs will be shipped back to you using your choice of one of the following carriers: USPS, UPS, Fed-Ex, and DHL. Customers pay the return shipping cost of the completed battery packs.
General Conditions
We extend our new customers a discount of 5% off initial orders for quantities of ten or more battery packs to be rebuilt at once. This requires the opening of a commercial account with Micropower Battery and agreement to our general conditions. Commercial accounts are available with Micropower Battery upon approval of our standard credit application with current vendor references. Our terms for payment on all commercial accounts are NET 30 days from date of invoice. Additionally, there are negotiable volume discount rates available for payment terms agreed upon between Micropower Battery and our clients.
If you have any questions regarding our rebuild service, feel free to contact Patrick N. Danforth at toll free (866) 999-CELL.
As the premiere source for the battery industry, Micropower Battery Company, Inc. appreciates the opportunity to supply you with a one-stop shop for all of your battery needs, locally and worldwide. Be sure to check our web site weekly for promotions or specialty products that may be available from time to time. We look forward to earning your continued business.
